Polyolefin Rubber Heat Shrink Thick Battery Wrap

This is NOT the thin PVC shrink wrap you see on generic batteries.  This is the thickest, toughest battery wrap and protection for your battery builds.   Measuring at 10 times the thickness of the traditional PVC shrink, it allows you to protect your new battery build.  Lined with heat activated glue, this allows for a watertight seal and further protection against vibration.  (Larger diameters above 200mm do not have the adhesive inside)

It costs 10 times the cost of thinner PVC for this reason.   Many Surron packs are built with this material.  It takes a very hot heat gun to shrink down to 40% of the size.   Measured as flat.  Please use a string to wrap your pack and fold string in half.  Then measure the half length.  Add 10 percent and this is the size you need to order.

For example.  If you have a pack that is 190mm in circumference (string wrapped around 360 degrees)  Fold the string in half and you will have 95mm.  If you order our 100mm wide this will most likely fit your pack perfectly.   No returns on cut product so make sure you order correctly.

Another way to find the size you need.

measure the width

measure the height

add the width and height together to get a no margin flat width

add 25mm to get a margin

This is your minimum size